Genie Drive Coupler




- +




If the motor can be heard operating, but the screw inside the rail is not rotating, then the drive coupler is likely stripped out on the inside and requires replacement. The genie drive coupler is located near the motor where the screw drive rail connects with two small bolts. Remove the bolts and pull the rail away a couple of inches to allow access to the coupler, It is cylindrical in shape and approximately one inch long. You will be able to pull it away from the motor by hand, or by using needle-nosed pliers. Simply replace the old one, and then bolt the rail back in place. COST: $13

Reviews (0)

Be the first to review “Genie Drive Coupler”

  • There are no reviews yet.